BLUZ  BROZ.

ENTERTAINMENT
Order Line (800) 530-3857    Phone (954) 938-2006     FAX (954) 772-0977

1/2"   Mount  Audiophile  Cartridges 

Technical Specifications

• Stylus Type: 0.6 mil. x 0.6 mil. Grain Oriented Natural Diamond.
• Cantilever Composition: Aluminum Alloy.
• Frequency Response: 16 Hz. - 25 kHz. +1.8 dB -0.5 dB.
• Output Voltage: 2.5 mV per channel at 1 kHz.; 5 cm./sec. peak recorded velocity.
• Channel Separation: Minimum 20dB at 1 kHz.
• Channel Balance: Minimum 1.8 dB at 1 kHz.
• Tracking Force Range: 1.7 to 2.3 grams.
• Optimum Tracking Force: 2.0 grams.
• Vertical Tracking Angle: 23 degrees.
• Optimum Load: 50,000 ohms resistance in parallel with 200 to 400 pico farads total capacitance.
• Static Compliance: Better than 25 x 10^-6 cm/dyne.
• Dynamic Compliance: Better than 5.1 x 10^-6 cm/dyne at 100 hz.
• Dynamic Compliance: 5.1 x 10^-6 cm/dyne at 100 Hz..
• Net Weight: 3.7 grams.
• Mounting: Standard 1/2" (12.7mm) Mounting Centers.

Your Price

$ 221.55 Each

EACH

Technical Specifications

• Stylus Type: 0.3 mil. x 0.7 mil. Elliptical Bonded Diamond.
• Cantilever Composition: Aluminum with special permalloy tubular alloy armature.
• Frequency Response: 10 Hz. - 22 kHz.
• Output Voltage: 3.6 mV per channel at 1 kHz.; 5 cm./sec. peak recorded velocity.
• Channel Separation: Minimum 25dB at 1 kHz.
• Channel Balance: Minimum 1.5 dB at 1 kHz.
• Tracking Force Range: 1.7 to 2.3 grams.
• Optimum Tracking Force: 2.00 grams.
• Vertical Tracking Angle: 22 degrees.
• Optimum Load: 50,000 ohms resistance in parallel with 250 pico farads total capacitance.
• Static Compliance: Better than 20 x 10^-6 cm/dyne.
• Dynamic Compliance: Better than 8.0 x 10^-6 cm/dyne at 100 Hz.
• Mounting: Integral Mount to a Bayonet Headshell.

Your Price

$ 107.83 Each

EACH

Technical Specifications

• Stylus Type: 0.6 mil. x 0.6 mil. Cross Grain Crystal Natural Diamond.
• Cantilever Composition: Aluminum alloy with special permalloy micro tubular armature.
• Frequency Response: 20 Hz. - 22 kHz.
• Output Voltage: 3.5 mV per channel at 1 kHz.; 5 cm./sec. peak recorded velocity.
• Channel Separation: Minimum 20dB at 1 kHz.
• Channel Balance: Better than 1.5 dB at 1 kHz.
• Tracking Force Range: 1.75 to 2.25 grams.
• Optimum Tracking Force: 2.0 grams.
• Vertical Tracking Angle: 22 degrees.
• Optimum Load: 50,000 ohms resistance in parallel with 200 to 400 pico farads total capacitance.
• Static Compliance: Better than 16 x 10^-6 cm/dyne.
• Dynamic Compliance: Better than 5.0 x 10^-6 cm/dyne at 100 Hz.
• Net Weight: 5.4 grams.
• Mounting: Standard 1/2" (12.7mm) Mounting Centers.

Your Price

$ 58.42 Each

EACH

Convertible   Mount  Audiophile  Cartridge

Technical Specifications

• Stylus Type: 0.6 mil. Diamond Equiradial.
• Cantilever Composition: Aluminum alloy with special permalloy micro tubular armature.
• Frequency Response: 20 Hz. - 20 kHz.
• Output Voltage: 3.5 mV per channel at 1 kHz.; 5 cm./sec. peak recorded velocity.
• Channel Separation: Minimum 20dB at 1 kHz.
• Channel Balance: Better than 2.0 dB at 1 kHz.
• Tracking Force Range: 1.0 to 1.75 grams.
• Optimum Tracking Force: 1.25 grams.
• Vertical Tracking Angle: 23 degrees.
• Optimum Load: 47,000 ohms resistance in parallel with 100 pico farads total capacitance.
• Net Weight: 5.9 grams.
• Mounting: Universal Mount that is convertible to Standard 1/2" (12.7mm) Mounting Centers or P-Mount..

Your Price

$ 71.55 Each

EACH

RELATED  PRODUCTS

SFG-2
Stylus Tracking Force Gauge

The Shure SFG-2 Stylus Tracking Force Gauge is the industry standard. This simple-to-use measuring device was developed to give listeners a way to insure against the problems caused by improper tracking force settings, which include mis-tracking, excessive record and tip wear, and poor sound reproduction.

This gauge is a highly accurate beam balance instrument designed to measure the actual downward force exerted by a stylus on a record over the range of 0.5 to 3.0 grams. Each gauge is individually calibrated, and displays readings in 0.05 gram increments in order to provide a precise measurement of stylus tracking force.

• The Safest Way to Remove Waxy Deposits,  Dust or other Deposit Build-Up from Your Phono Stylus.

• D5SC060 Stylus Cleaning Formula Dissolves Foreign Material Known to Hinder Proper Stylus Tracking.

• Brush Applicator Quickly Whisks Away and Dissolves Deposits Without Harming the Delicate Diamond Stylus.

• A Regular Regimen Between Album Side Plays Extends Both Stylus and Record Life.

• This Fluid is Particularly Important for Cartridges and Tone Arms which use Low Tracking Force.

• Manufacturer: D5 Squared Products.

SYSTEM CONTENTS:

• D5SC060 Stylus Cleaning Formula Includes Applicator in Cap.

• The D5SC060 Stylus Cleaning Formula in a 2.02 Ounce (60 ml.) Smoked Glass Bottle.

WARNING!  WARNING!  WARNING!

• Avoid Prolonged Breathing of Vapors or Immediate Contact with Skin.
  Use Only with Adequate Ventilation.

• DO NOT TAKE INTERNALLY.

• In case of eye contact, flush with water immediately.  If swallowed, induce vomiting only when conscious.  Call a physician.

DANGER! 

This FLAMMABLE formula should NOT be used near heat, sparks or open flame.

Your Price
$ 17.92

EACH

BENEFITS:

• Four "color coded" headshell wires.

• Gold plated terminals for best conduction.

• Silk wrapped LC-OFC copper Litz conductors.

• Manufacturer: Audioquest.

Your Price
$ 24.93

Set of Four

BENEFITS:

• Greater clarity and contrast from damping vinyl records on glass or metal platters.

• Replaces factory record mat.

• Manufacturer: Audioquest.

Your Price
$ 94.22

EACH

BENEFITS:

• Contains more than 1,000,000 conductive carbon fibers for effective record cleaning.

• Designed for dry use.

• Works well on LCD screens and keyboards too!

• Manufacturer: Audioquest.

Your Price
$ 19.91

EACH

Return to CARTRIDGE HOME PAGE